7mm Venturan (P.O. Ackley Data) |
 |
| Warning! Notes: Standard twist: 10". This cartridge has the same general design as the 7mm Express; however, it is a little longer and is made by necking down and shortening .300 Magnum brass in a special tool to produce a radius shoulder. Cases can also be made from .264 Winchester, .338 Winchester or .375 H&H brass. The case is 2.235 inches long with .020 taper. The following loads were obtained in a 25 inch barrel with 10 inch twist. (Handbook for Shooters & Reloaders/Vol. 1 - P.O. Ackley, 1962) NOTE: USE THIS DATA WITH EXTREME CAUTION |
| Be Alert: Publisher cannot be responsible for errors in published load data. |
| Wt. | Bullet | Powder Manufacturer | Powder | Charge | Velocity (FPS) | |
| 139 | IMR | IMR-4350 | Subscribe | 3345 | ||
| Remarks: | ||||||
| 140 | IMR | IMR-4350 | Subscribe | 3345 | ||
| Remarks: | ||||||
| 154 | IMR | IMR-4350 | Subscribe | 3185 | ||
| Remarks: | ||||||
| 154 | IMR | IMR-4831 | Subscribe | 3250 | ||
| Remarks: | ||||||
| 160 | IMR | IMR-4350 | Subscribe | 3235 | ||
| Remarks: | ||||||
| 160 | IMR | IMR-4831 | Subscribe | 3290 | ||
| Remarks: | ||||||
| 175 | IMR | IMR-4350 | Subscribe | 3135 | ||
| Remarks: | ||||||
| 175 | IMR | IMR-4831 | Subscribe | 3090 | ||
| Remarks: | ||||||